Analog outputs unit, type PEA208
- two independent analog outputs 0-10 V
- 10 bits resolution
- possibility to control devices with interface 0-10V (dimmable ballast for fluorescent lamps, dimmers, frequency converters ...)
- ability to sink current up to 100mA each output (more then 100 of ballasts)
- two switching outputs (automatically switched on if analog output voltage is greater then 1V (for power supply of ballasts)
- control by bus PEXbus and external press buttons
- test buttons on front panel
- programmable parameters (input response, min., max. value of output voltage, dimming speed)
- indication of power supply and output level
- easy installation
- small dimensions
Power requirements: | 230V / 50/60Hz, 50 mA |
Number of regulated outputs: | 2 |
D/A converter resolution: | 10 bits (1024 levels) |
Max. load of analog outputs: | 100mA sink,15mA source every output |
Number of relay outputs: | 2 |
Max. load of relays outputs: | 230V/8A every output |
Insulation strength: | 2.5 kV between power and control circuits |
Control terminals: | For conductors up to S = 1.5 mm2 |
Power supply terminals: | For conductors up to S = 1.5 mm2 |
Output terminals: | For conductors up to S = 1.5 mm2 |
Input/Output PEXbus: | Connector RJ-11-4 |
Operating ambient temp.: | 0 to 60 °C |
Storage temperature: | -20 to 90 °C |
Weight: | 0.25 kg |
Dimensions: w x h x d: | (71 x 90 x 58) mm (4 modules, 17.5 mm each) |
Terminals connection
Power Express
PEA208
PEC25
PED108
PED202
PEE120
PEF150
PEF200
PER610
PES03
PET102
PEW200
FDC13
Profil firmy ApolloArt
Jeseniova 1522/53
130 00 Praha 3
Tel./Fax.:
+420 274 775 085
+420 274 772 527
© 2011 Pixelfield, s.r.o. - webdesign a tvorba webových aplikací